XNX Universal Transmitter
Relay Data displays the current setting of the optional relays on
the transmitter� To change the relay settings, see Relay Options�
Event History
?
The Event History screen lists all events that are activated by
the transmitter's settings� Five types of events are recorded:
reset messages, alarm messages, warning messages, fault
messages, and informational messages� The events are listed in
chronological order beginning with the latest�
Events can be displayed through five browsing modes:
• all events in order of occurrence
• all events by hour
• all events by day
• only the alarm events, in order of occurrence
• only the fault events, in order of occurrence
The Event History screen groups events into chronological order
(beginning from the unit's installation)� Events can also be viewed
by hour or by date�
Events listed in hour order are grouped without regard to date�
For example, all events that have occurred between noon and
1:00 o'clock since the transmitter's installation can be isolated�
To view all events in hour order:
1� Use the magnetic wand to filter the display by hour�
2� Navigate through the displayed times�
To isolate all of the events from a specific day :
1� Use the magnetic wand to filter the display by day�
2� Navigate through the displayed days�
3� Filter the list by all events� This will display all events that
occurred on that day�
When the transmitter is configured with the Searchline Excel or
Section 2 - Installation and Operation
Searchpoint Optima, the data reported in the event will be the
fault code from the Searchline Excel or Searchpoint Optima�
The transmitter records up to 1280 events in a circular buffer�
When event 1281 is recorded, the oldest event will be bumped
from the list�
Note: The leading zeros of faults and warnings are not displayed
in the event list; i.e., Fault 011 will be displayed as Fault 11.
Figure 187. Event History Screen
Figure 188. Chronological Event List
Figure 189. Chronological Event List by Hour
87