3.4.3.2.
VRAM TEST
While this test is executing, the screen maybe displayed garbage. However beep sounds let you
executing the VRAM test normally.
Screen of LCD
***** VRAM TEST *****
VRAM Size : ** KB
Read/Write test : ********H
Test done. Press any key.
If diagnostic program detects failure, it displays "NG" on screen and adds the test result into Event Log.
3.4.4. Battery Test
The test is as follows.
Screen of LCD
0 : Return to MAIN MENU
1 : Status Check Test
2 : Power Fail Test
Select and press ENTER key : 0_
3.4.4.1.
Status Check Test
Screen of LCD
Please Turn Off AC Pierre-plug in again when you hear beep sounds
Press [F1] or [F2] key to exit.
Test Result is
F1=STOP/CONTINUE
***** Video Test. *****
***** Battery Test.*****
***** Status Check Test. *****
F2=STOP / MENU
34
EXIT
0
1
2
ENTER