Panasonic JS-925WS-010 Service Manual page 52

3.4.8.1. Calibration
The same calibration as the ordinary mode.
The calibration of T/P of EETI is as following:
The Four cross marked the press point will be displayed sequencly from low-left ,low-right, up-right and
up-left while you pressed the "+" cross mark ,reference the following diagram.
Note) When application is run on Windows, it is recommended to calibrate
touch panel by Windows Tool. There is small discrepancy between e-Diag
base adjustment and Windows base adjustment.
+
+
Please press 4 points
+
+
Display of LCD DISPLAY
44