Power Management; Serial Ports - Panasonic JS-925WS-010 Service Manual

This specification is the description of features and modules to be used in building the BIOS. This BIOS will be
used on the Mid-Range motherboard with BGA437 Intel Atom N270 processor and Intel 945GSE Chipset.
Hard Disk Drive
Ultra ATA 100/66/33
Auto-Detect HDD Type
Auto-Detect HDD Access Mode (LBA/CHS/Large)
Serial- ATA 3Gb/s ports
Multi-Boot
Every IDE channel bootable
Boot from USB-HDD
Boot from USB-CDROM
BIOS auto by CMOS bit

Power Management

ACPI 2.0 Compliant
S1 S2
System Health Monitor
System Temperature Monitor
System Bus
Supports PCI Revision 2.2 Specification
Dynamic assign Resource for all PCI Devices during POST
USB 1.1
Memory
SPD Support
Auto DRAM configure

Serial Ports

UART 1
UART 5
SMBIOS
System Management BIOS Specification 2.3 Compliant
BIOS ROM
16Mb Flash ROM
1 Introduction
2 Specification Description
PIO Mode 0-4
Auto-Detect HDD PIO Mode
CD-ROM Bootable
Boot from USB-ZIP
Boot from USB-Storage
Power Button Over Ride
S3
System Voltages Monitor
USB 2.0
non-ECC DDR SDRAM
Auto Memory Sizing
UART 2
UART 6
BIOS On-Board Flash
Boot from Serial-ATA
Boot from USB-FDD
PXE Boot
LED Blinking Support
S4 S5
Legacy USB keyboard support.
Auto Cache RAM Sizing
UART 3
198
UART 4