Heat Run Mode - Panasonic JS-925WS-010 Service Manual

3.3.3. Heat run mode

It is possible to test automatically repeating only the targeted item of the test items.
(However, there are a test item for the heat run and an item of the uncorrespondence. )
The test frequency and test result are displayed in LCD at any time.
The test frequency of the heat run test is assumed to be infinite times.
Test result is record/write into the DMI System Event Log. Duplicated error is recorded only once.
Administrator authorization/login is needed to execute the Heat run mode.
3.3.3.1 Heat run selecting items
【 display of selective state 】
The item that the "*" sign is attached to the left of the test number of the main menu shows the selective
state.
In the state of default, at program initiation,
・ Random Access Memory Test
・ Hard Disk Test
・ Video Test
・ Ethernet Test (Only Self Test )
5 items have been selected.
【 How to select and to release 】
In the main menu, the selective state can be reversed by matching the cursor to the selection or the item to
want to do the selection release, and pressing the F5 key.
3.3.3.2 Execution of heat run
In the main menu, it is confirmed that the [*] sign has been marked in the left of a target test item.
Select "14 : Heat Run" and "ENTER".
26