Panasonic JS-925WS-010 Service Manual page 171

Security
POST or Setup menu password protection
Supported OS
MS-DOS 6.22
Windows Vista
POST Hotkey Description:
Del : Enter BIOS Setup Screen
F10 : Launch Diagnostic program
F11 : Choose Boot Device
F12 : Force boot from LAN
Touch Panel Operation
Touch panel operation should be available;
- To invoke Boot Option menu from boot up screen.
- The BIOS and e-Diag program only support EETI TP controller.
BIOS Flash Function:
AMI BIOS support three BIOS flash method. (Please refer to Chapter 5)
- MS-DOS
- Boot block
- Windows(support GUI and Command Line Interface, the CLI syntax same as MS-DOS utility)
Power LED Function:
Power LED status information
S0 Green LED Light
S1 (POS) Green LED Blink
S3 (STR)
S4 (STD)
S5
Battery Backup Orange LED Light
Windows XP
Windows XP Embedded
LED mode
1Hz pulse with 50% duty cycle
Red LED Blink 1Hz pulse with 50% duty cycle
Red LED Blink 1Hz pulse with 50% duty cycle
Red LED Light
Linux(Slackware12, Kernel 2.6)
Duty Cycle
100%
100%
100%
199
Remark
System is operating now.
System is operating now +
turn off monitor.
Standby on WinXP (depends
on BIOS setting)
System is suspended
Ram, from a operating status.
Standby on WinXP, depends
on BIOS setting.
System is suspended to Disk,
from a operating status.
Hibernation on WinXP.
System is Off now.
Battery backup the system.
to