Panasonic JS-925WS-010 Service Manual page 184

Table: 4.2.6
Items
Power Management
/ APM
Power Button Mode
Advanced Resume Event Controls
Resume on LAN
Resume on RTC
Alarm
Table: 4.2.6
Items
View Event log ---
Mark all events
as read
---
Clear Event log
Table: 4.2.7
Items
Marvell 6121
[Legacy]
Operation mode [RAID]
[Enable]
Battery at POST
[Disable]
[GPIO Only]
[GPIO & Signal immediately]
After Power
Failure Detection [GPIO & wait 10 sec, then
Signal]
V.
Choices
[Disabled]
[Enabled]
[On/Off]
[suspend]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
VI. Event log Configuration
Choices
VII. Customized Configuration
Choices
APM Configuration
Enable or disable APM
Support
"Suspend" for Power Button
mode
Explanation:
This item will only influence
power button behavior in DOS
and specific APM OS.
Disable/Enable LAN GPI to
generate a wake event
Disable/Enable RTC to generate
a wake event
Show Event log history
Mark all events as read already
Erase Event log
Set up Marvell 6121 function
Enable/Disable Battery at POST.
BIOS sends the same signal as
the signal pushed Power Button.
212
Note
"On/OFF" and
Note
Note
Disp
Yes
Yes
Yes
Yes
Disp
Yes
Yes
Yes
Disp
Yes
Yes
Yes