Password Set
****
Set and press ENTER key
0
7
2.
Interactive User Mode Description
If user selected the Interactive User Mode in Diagnostic test mode selection page, user can select to run
limited test items.
3.
Automatic Mode Description.
If user selected the Automatic mode in Diagnostic test mode selection page, test items runs automatically.
Test items are defined on CMOS data, which can be changed by special tool.
If user selects "Automatic Mode", diagnostic program execute selected test item, and test results are write
down the System Event LOG only when test result is FAIL (NG).
After all the selected test items are done, diagnostic program automatically reboot.
e-Diag Test Mode Selection---V1.10
1
2
3
8
9
F5
4
5
6
BS
ENTER
23