Panasonic JS-925WS-010 Service Manual page 59

0 : Return to MAIN MENU
1 : USB Interface Test.
Select and press ENTER key : 0_
Screen of LCD
USB Interface Test PORT 1 Low speed device connected
USB Interface Test PORT 2 Low speed device connected
USB Interface Test PORT 3 Low speed device connected
USB Interface Test PORT 4 Low speed device connected
USB Interface Test PORT 5 Low speed device connected
USB Interface Test PORT 6 Low speed device connected
USB Interface Test PORT 7 Low speed device connected
USB Interface Test PORT 8 Low speed device connected
ENTER 1(OK) or 2 (NG)
･The device type connected with the screen is displayed.
The treatment device connection port for USB1.0: "Low speed device connected" is displayed.
The USB1.1 device is connected port: "Full speed device connected" is displayed.
The USB2.0 device is connected port: "High speed device connected" is displayed.
USB device unconnected port: "USB device not connected" is displayed.
Press 1(OK) or 2(NG) Button, the following figure displayed:
:
.
USB Interface Test PORT 1 Low speed device connected
USB Interface Test PORT 2 Low speed device connected
USB Interface Test PORT 3 Low speed device connected
USB Interface Test PORT 4 Low speed device connected
USB Interface Test PORT 5 Low speed device connected
USB Interface Test PORT 6 Low speed device connected
USB Interface Test PORT 7 Low speed device connected
USB Interface Test PORT 8 Low speed device connected
Test done. Press any key
***** USB Test. *****
***** USB Test. *****
***** USB Test. *****
51
0
1
Enter
1(OK) 2(NG)
EXIT
Light Brown