System Settings Tool; Introduction; Activation Of System Settings In User Mode - Panasonic HM 700 Series Instruction Manual

System settings tool

15. System settings tool

15.1 Introduction

The HMx700 series touch terminals have a system settings interface to allow the configuration of
system options.
The user interface of "System Settings" is based on HTML pages accessible locally on the touch ter-
minal or remotely using a web browser, e.g. Chrome v44 or higher on port 443. To connect, enter the
address https://IP/machine_config. "IP" represents the address of the touch terminal. The default user
name is "admin", and the default password is "admin".
Use the navigation menu on the left side of the screen to browse through the available options.
On the left side, the selected menu item is highlighted. The right side shows related information and
settings. Depending on the size of the touch terminal, menu and content of the selected menu item
may not be displayed next to each other on the screen.
The system settings interface has two operating modes:
User mode HMWIN runtime is running or the status of the touch terminal is set to "factory
default".
System mode HMWIN runtime is not running or there is a software failure.
The system mode includes all options available in user mode. In addition, the
system mode offers commands dedicated to system upgrade and recovery which
are not available in user mode.

15.2 Activation of system settings in user mode

Factory default Touch the "System Setting" button on the touch terminal.
status
HMWIN runtime To activate the system settings in user mode, touch and hold any unused area of
running
the touchscreen for a few seconds to access the context menu. The default holding
time is 2 seconds.
25