Avaya 1140E Software User's Manual page 17

Key
August 2017
Note:
The key on the lower right is reserved as your default line
key.
Context-sensitive soft keys are located below the telephone
display screen. The LCD label on the screen above each key
changes based on the active feature.
Use the Volume control buttons to adjust the volume of the
ringer, handset, headset, speaker, and the Handsfree feature.
Press the top button to increase the volume, and press the bottom
button to decrease the volume.
Press the Mute key to listen to the call without transmitting. Press
the Mute key again to return to two-way conversation. The Mute
key applies to handsfree, handset, and headset microphones.
Note:
When you enable mute, a red LED on the Mute key remains
lit.
Press the Handsfree key to activate the built-in speaker and
microphone of the IP Deskphone.
Note:
The Handsfree LED indicator on the Handsfree key lights to
indicate when handsfree is active.
Use the Navigation Key Cluster to scroll through menus and lists
that appear on the LCD display screen or for text entry. The outer
part of this key cluster rocks for up, down, left, and right
movements.
Press the Enter key, at the center of the Navigation Key Cluster, to
select menu items or to confirm changes.
Note:
The Enter key has the same function as the context-sensitive
soft keys Select and Set.
Press the Goodbye/Release key to terminate an active call. When
multiple calls are active, press the Goodbye/Release key to end
the highlighted call.
Press the Goodbye/Release to close menu navigation or cancel
user tasks.
Press the Expand key to access the Instant Messaging Log.
Press the Headset key to answer a call using the headset or to
switch a call from the handset or handsfree to the headset.
Avaya 1140E IP Deskphone with SIP Software User Guide
Comments on this document? infodev@avaya.com
Avaya 1140E IP Deskphone controls
Function
Table continues...
17