GE CareScape V100 Service Manual page 49

Setting
SpO sat
2
(Masimo only)
SpO sensitivity
2
(Masimo only)
Temperature units
Temperature display
time
Year
Month
Day
Hour
Minute
Mode
(when main screen is
active)
NOTE: Refer to the "SpO section of operator's manual for detailed descriptions of the different user selectable SpO
2"
2048723-002C
Installation: Configuring the monitor
Window LED display
SpO 0 or 1
2
SpO 1, 2, 3
2
Temperature blank
Temperature 2 or 5
Systolic XXX (numeric)
MAP/Cuff XXX (numeric)
Diastolic XXX (numeric)
min XXX (numeric)
min XXX (numeric)
Systolic blank
Setting the date and time – To set the date and time on the monitor, you must
access the configuration mode. Press Menu to skip the default settings that do
not require changes. Refer to the table above.
NOTE
While in configuration mode, all entries stored in the clinical history are
erased when the time and/or date is changed.
Procedures
1. Press the Menu button to move from one setting to another. Use the +/-
buttons to increment or decrement the setting.
NOTE
For the date and time to be saved, you must advance the menu through
the minute setting.
2. To exit the configuration mode, press the On/Off button.
3. To continue with other changes, press the Menu button.
the Systolic window. To change parameter settings, press the Menu button
CARESCAPE V100 Vital Signs Monitor
Pulse Rate
window
display
Fast Sat Mode
0=Off
1=On*
1= Low Perfusion-Maximized,
2= Low Perfusion-Default,
3= for engaging Adaptive Probe
Off Technology algorithm*
C or F indicator illuminated (Alaris
only)
User selects number of minutes
temperature values are
displayed.
use + and - keys to change
use + and - keys to change
use + and - keys to change
use + and - keys to change
use + and - keys to change
indicates configuration mode
settings.
2
Comment
will appear in
3-7