GE CareScape V100 Service Manual page 48

Setting
Inflate pressure
(adult/ped)
Inflate pressure
(neonate)
Line frequency mode
(Ohmeda TruSignal only)
SpO mode
2
(Nellcor only)
SpO sat
2
(Nellcor only)
SpO mode
2
(Masimo only)
3-6
Installation: Configuring the monitor
Major software revision
Minor software revision
Type of NIBP technology
Temperature type technology
These displays appear only during the first part of the power up sequence and
are not selectable and cannot be changed. After a moment, this version
information is cleared, and the monitor displays the first page of configuration
mode which simply displays
Pressing the Menu button cycles through all the configuration option pages.
After all options pages have been displayed, the display returns to the first
configuration mode page (displaying
make changes to settings. After making changes, simply cycle the power to
return to normal operation (clinical) mode. Changes are automatically retained.
NOTES
If a parameter is not enabled, its options are not displayed.

Menu selections for SpO

technology your monitor contains.
The Menu selections appear in the following order. Refer to the manual section
for settings options.
Window LED display
Systolic XXX (numeric)
Systolic XXX (numeric)
SpO 50 or 60
2
SpO 1 or 2
2
SpO 0, 10, 25, 50, 100
2
SpO 4, 6, 8, 10, 12, 14, 16
2
CARESCAPE V100 Vital Signs Monitor
Display
in the Systolic window.
). You can use the + and - buttons to
settings are different depending upon the SpO
2
Pulse Rate
window
display
XXX (numeric)
XXX (numeric)
Window
Systolic
Diastolic
min
Temperature
Comment
ADULT indicator illuminated,
INFLATE PRESSURE indicator
flashing
NEONATE indicator illuminated,
INFLATE PRESSURE indicator
flashing
AC line frequency
User selects the averaging
technique*
1=Normal Response
2= Fast Response
User selects the SMART Sat
tolerance level *
User selects the number of
seconds over which data is
averaged 4 to 16*
2048723-002C
2