The Class Configuration Screen - ZyXEL Communications P-793H v3 User Manual

Figure 107 Advanced > QoS > Class Setup
The following table describes the labels in this screen.
Table 68 Advanced > QoS > Class Setup
LABEL
Create a new Class
No
Active
Name
Interface
Priority
Modify
Apply
Cancel

17.3.1 The Class Configuration Screen

Use this screen to configure a classifier. Click the Add button or the Edit icon in the Modify field to
display the following screen.
Chapter 17 Quality of Service (QoS)
DESCRIPTION
Click Add to create a new classifier.
This is the number of each classifier. The ordering of the classifiers is important
as the classifiers are applied in turn.
Select the check box to enable this classifier.
This is the name of the classifier.
This shows the interface from which traffic of this classifier should come.
This is the priority assigned to traffic of this classifier.
Click the Edit icon to go to the screen where you can edit the classifier.
Click the Remove icon to delete an existing classifier.
Click this to save your changes.
Click this to restore your previously saved settings.
P-79X Series User's Guide
172