Manual Configuration - ZyXEL Communications P-793H v3 User Manual

Figure 17 Auto-Detection: PPPoE
The following screen appears if the ZyXEL device detects a connection but not the connection
3c
type. Click Next and refer to
for Internet access.
Figure 18 Auto Detection: Failed

4.2.1 Manual Configuration

If the P-79X fails to detect your DSL connection type but the physical line is connected, enter your
1
Internet access information in the wizard screen exactly as your service provider gave it to you.
Leave the defaults in any fields for which you were not given information.
Chapter 4 Internet Setup Wizard
Section 4.2.1 on page 33
P-79X Series User's Guide
33
on how to manually configure the P-79X