Troubleshooting; Chapter 25 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications P-793H v3 User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• P-79X Access and Login
• Internet Access
• Network Connections
25.1 Power, Hardware Connections, and LEDs
The P-79X does not turn on. None of the LEDs turn on.
Make sure the P-79X is turned on.
1
Make sure you are using the power adaptor or cord included with the P-79X.
2
Make sure the power adaptor or cord is connected to the P-79X and plugged in to an appropriate
3
power source. Make sure the power source is turned on.
Turn the P-79X off and on.
4
If the problem continues, contact the vendor.
5
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Turn the P-79X off and on.
4
If the problem continues, contact the vendor.
5
C
HAPTER
P-79X Series User's Guide
232

Troubleshooting

Section 1.4 on page
2 5
16.