Advanced Internet Access Setup - ZyXEL Communications P-793H v3 User Manual

Table 14 2wire-2line Service Mode (continued)
LABEL
Enable Rate
Adaption
Transfer Max Rate
(Kbps)
Transfer Min Rate
(Kbps)
Standard Mode
Modulation
Apply
Cancel
Advanced Setup

6.2.2 Advanced Internet Access Setup

Use this screen to edit your P-79X's advanced WAN settings. Click the Advanced Setup button in
the Internet Access Setup screen. The screen appears as shown.
Figure 30 Network > WAN > Internet Access Setup: Advanced Setup
Chapter 6 WAN Setup
DESCRIPTION
Indicate whether or not the P-79X can adjust the speed of its connection to
that of the other device.
This field is enabled if Service Type is Server. Set the maximum rate at which
the P-79X sends and receives information. The actual transfer rate will be
between this value and the minimum transfer rate you configure.
This field is enabled if Service Type is Server. Set the minimum rate at which
the P-79X sends and receives information. The actual transfer rate will be
between this value and the maximum transfer rate you configure.
Select the operational mode the P-79X uses in the DSL connection. Annex A
refers to connections over POTS and Annex B refers to connections over ISDN
lines.
Select the modulation supported by your ISP.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
P-79X Series User's Guide
51