Snmpv3 Views Configuration - Planet SGSW-24040R User Manual

• Authentication
Password
• Privacy Protocol
• Privacy Password

4.3.5.5 SNMPv3 Views Configuration

Configure SNMPv3 views table on this page. The entry index key are View Name and OID Subtree.
The SNMPv3 Views Configuration screen in
The page includes the following fields:
Object
•
Delete
•
View Name
protocol.
• SHA: An optional flag to indicate that this user using SHA authentication
protocol.
The value of security level cannot be modified if entry already exist. That
means must first ensure that the value is set correctly.
A string identifying the authentication pass phrase. For MD5 authentication
protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the
allowed string length is 8 to 40. The allowed content is the ASCII characters from
33 to 126.
Indicates the privacy protocol that this entry should belong to. Possible privacy
protocol are:
• None: None privacy protocol.
• DES: An optional flag to indicate that this user using DES authentication
protocol.
A string identifying the privacy pass phrase. The allowed string length is 8 to 32,
and the allowed content is the ASCII characters from 33 to 126.
Figure 4-3-8 appears.
Figure 4-3-8 SNMPv3 Views Configuration page screenshot
Description
• Check to delete the entry. It will be deleted during the next save.
A string identifying the view name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is the ASCII characters from 33
to 126.
User's Manual of WGSW-24040 / WGSW-24040R
73
SGSW-24040 / SGSW-24040R