Planet SGSW-24040R User Manual page 294
24-port 10/100/1000mbps layer 2 managed switch
Hide thumbs
Also See for SGSW-24040R:
- User manual (570 pages) ,
- Quick installation manual (12 pages) ,
- User manual (567 pages)
Table of Contents
Advertisement
■ Stacking not functioning
Solution:
1.
Check that modules are installed correctly
2.
PLANET CB-STX50 or CB-STX200 cables not installed correctly (LEDs on front panel STX1 or STX2 do not light)
3.
Check that the cables are inserted correctly
4.
The stack cable is PLANET proprietary stack cable, the stack cable is cross-overed HDMI-like cable, the normal HDMI
cable can't be used for the SGSW series.
While IP Address be changed or forgotten admin password –
To reset the IP address to the default IP Address "192.168.0.100" or reset the password to default value. Press the hardware
reset button at the front panel about 10 seconds. After the device is rebooted, you can login the management WEB interface
within the same subnet of 192.168.0.xx.
Reset
User's Manual of WGSW-24040 / WGSW-24040R
294
SGSW-24040 / SGSW-24040R
Advertisement
Table of Contents
