4.8.6 Bandwidth Control
Configure the switch port rate limit for Policers and Shapers on this page. The settings relate to the currently selected stack unit,
as reflected by the page header. The screen Bandwidth Control in
The page includes the following fields:
Object
•
Port
•
Policer Enabled
•
Policer Rate
•
Policer Unit
•
Shaper Enabled
• Shaper Rate
• Shaper Unit
Figure 4-8-13 XXXXXXX page screenshot
Description
The logical port for the settings contained in the same row.
Enable or disable the port policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
Configure the unit of measure for the port policer rate as kbps or Mbps. The
default value is "kbps".
Enable or disable the port shaper. The default value is "Disabled".
Configure the rate for the port shaper. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
Configure the unit of measure for the port shaper rate as kbps or Mbps. The
default value is "kbps".
130
User's Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
Figure 4-8-13
appears.