Last Supplicant/Client Info
For MAC-based ports, this section is embedded in the RADIUS counter's section.
Information about the last supplicant/client that attempted to authenticate.
Name
dot1xAuthLastEapolFrame
Version
Version
dot1xAuthLastEapolFrame
Source
Source
Identity
-
or (Last) Client
Clients attached to this port
This table is only available for MAC-based ports
Each row in the table represents a MAC-based client on the port, and there are three parameters for each client:
MAC Address: Shows the MAC address of the client, which is also used as the password in theauthentication
•
process against the RADIUS server. Clicking the link causes the client's RADIUS counters to be shown in the
right-most RADIUS counters table above. If no clients are attached, it shows No clients attached.
•
State: Shows whether the client is authorized or unauthorized. As long as the RADIUS server hasn't successfully
authenticated a client, it is unauthorized.
Last Authentication: Show the date and time of the last authentication of the client. This gets updated for every
re-authentication of the client.
Last Supplicant/Client Info
IEEE Name
Port-based:
The protocol version number carried in the most recently received
EAPOL frame.
MAC-based:
Not applicable.
Port-based:
The source MAC address carried in the most recently received
EAPOL frame.
MAC-based:
Not applicable.
Port-based:
The user name (supplicant identity) carried in the most recently
received Resp/ID EAPOL frame.
MAC-based:
The MAC address of the last client that attempted to authenticate
(left-most table), or the MAC address of the currently selected
client (right-most table).
User's Manual of WGSW-24040 / WGSW-24040R
MAC-based:
Counts all the RADIUS packets sent from the switch towards
the RADIUS server for a given port (left-most table) or client
(right-most table). Possible retransmissions are not counted.
Description
153
SGSW-24040 / SGSW-24040R