■ DC Power Connector
The rear panel of the WGSW-24040R and SGSW-24040R contains a power switch and a DC power connector, which
accepts DC power input voltage from -30V to -60V DC. Connect the power cable to the Managed Switch at the input
terminal block. The size of the two screws in the terminal block is M3.5.
Before connect the DC power cable to the input terminal block of WGSW-24040R or SGSW-24040R,
Warning:
ensure that the power switch in the "OFF" position and the DC power is OFF
Figure 2-9 SGSW-24040 / SGSW-24040R Stack Ports
Figure 2-10 Rear Panel of WGSW-24040R / SGSW-24040R
User's Manual of WGSW-24040 / WGSW-24040R
25
SGSW-24040 / SGSW-24040R