Planet SGSW-24040R User Manual page 180

•
Policy ID
•
Action
•
Rate Limiter ID
•
Port Copy
• Logging
• Shutdown
• Counter
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled".
Select which port frames are copied to. The allowed values are Disabled or a
specific port number. The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
• Enabled: Frames received on the port are stored in the System Log.
• Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Counts the number of frames that match this ACE.
180
User's Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R