Planet SGSW-24040R User Manual page 20

■ Reset button
At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power. The
following is the summary table of Reset button
Reset Button Pressed and Released
About 1~3 second
Until the PWR LED lit off
■ Stack ID
SGSW-24040 and SGSW-24040R only
Each SGSW Managed Stackable Switch on a stack must have a unique "Stack ID". There are 16 degrees (0~9, A~F) in the
rotary switch. The Stack ID is configured via Web or CLI management interface. Use the Stack ID to identify the localtion of
the real device.
Stack ID is not equals to the Master Priority that configured in the management interface.
■ Master LED
SGSW-24040 and SGSW-24040R only
If master switch is fail or disconnected to the switch by stack port, the switch with least switch ID will become master.
User's Manual of WGSW-24040 / WGSW-24040R
functions:
Function
Reboot the Managed Switch
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
Default Password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
。
20
SGSW-24040 / SGSW-24040R