Planet SGSW-24040R User Manual page 61

Example 1: Save Current Configuration setting
To save all applied changes and set the current configuration as startup configuration. The startup-configuration file will be load
automatically across a system reboot.
1. Click System, File Management, Copy Operation.
2. Select "running-config to startup-config" as the file transfer method.
3. Select the startup file name used for startup on the Managed Switch to overwrite or specify a new file name, then click
Apply.
You can also select any configuration file as the start-up configuration by using the
System/File Management /Set Start-Up page.
4. If you specify a new file name to startup-config, click System \ File Management \ Set Start-up to check the specified file be
set to "Y" in the "Startup" column.
Figure 4-2-17 Configuration saving screenshot
Figure 4-2-18 Set Start-up screenshot
61
User's Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R