Route Header in SIP Packet
Parameter –
sip remove route
Description
Format
Default Value
Range
Example
Compact SIP Header
Parameter –
sip compact headers
Description
Format
Default Value
Range
Example
Rejection of INV or BYE
Parameter –
sip enforce require hdr
Description
Format
Default Value
Range
Example
41-001343-02 REV05 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables and disables the addition of the Route header in a SIP packet. Enable this param-
eter for outbound proxies that do not support Route headers.
Note:
When enabled this will break all support for SIP routing, so if some other device in the
network attempts to add itself to the route it will fail.
Boolean
0
0 (disable - adds the Route header to the packet)
1 (enable - removes the Route header from the packet)
sip remove route: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the IP phones to use compact SIP headers in the SIP packets sent
from the phone.
Boolean
0 (disabled- uses long SIP header format)
0 (disabled- uses long SIP header format)
1 (enabled- uses short (compact) SIP header format)
sip compact headers: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables and disables the rejection of an INV or BYE with a "420 Bad Extension" if the INV
or BYE contains an unsupported value in the REQUIRE header.
Integer
0
0 (disable)
1 (enable)
sip enforce require hdr: 1
Advanced Operational Parameters
A-217