New Features In Release 3.2.2; Configuration Features; Sip Features; User Interface Features - Aastra 6700i series Instruction Manual

New Features in Release 3.2.2

New Features in Release 3.2.2
This section provides the new features in SIP IP Phone Release 3.2.2. These new fea-
tures apply to all of the Aastra IP Phones, unless specifically stated otherwise.
The following table summarizes each new feature and provides a link to more infor-
mation within this Release Note. Each feature also specifies whether it affects the
Administrator, the User, or the XML Developer.
This table also provides the documentation location of features that have already
been documented in Aastra's documentation suite. Refer to those documents for
more information about the applicable feature.
Feature

Configuration Features

Model Specific Configuration File
(For Administrators)

SIP Features

Keep-Alive Feature for Persistent TLS
Connections
(For Administrators)
Custom Ad Hoc Conference
(For Administrators)

User Interface Features

Shifting of Softkey Positions for Busy
States
(For Administrators)
Local Directory Loose Number
Matching
(For Administrators)
Background Image on Idle Screen
(For Administrators)
5
Description
In addition to the aastra.cfg and <mac>.cfg files, there is now a
model specific configuration file that is requested after the aas-
tra.cfg file is downloaded. The file is called <model>.cfg.
*New for all phones
Now in 3.2.2, the keep-alive feature has been added for persistent
TLS connections only. Administrators can configure this keep-alive
feature using the new parameter called "sip persistent tls keep alive".
When this feature is configured, the phone will send keep-alive
pings to the proxy server at configured intervals.
*New for all phones
Now Administrators can use the "custom adhoc conference" param-
eter to enable the phone to interoperate with Genband Call Man-
ager for ad hoc conferences. This parameter is disabled by default.
*New for all phones
User programmable softkeys 1 and 2 on the 6755i, 6757i, 6757iCT,
9480i, and 9480iCT phones will now appear on page 1 in position 4
and 5 during the outgoing, ringing, connected, and hold states.
*New for 6757i, 6757i, 57iCT, 9480i, & 9480iCT only
Administrators can enter a parameter "directory digits match" to
determine the number of digits (from the incoming call) that the
phone will use to perform a lookup in the local directory to match
the number to a contact.
*New for all phones
The 6739i phone can now display a background image that will be
shown on the idle screen only.
*New for 6739i only
RN-001037-02 REV03 – 06.2011