Customizable Message Waiting Indicator (Mwi) Request Uri - Aastra 6730i Administrator's Manual

Aastra Web UI
1. Click on Basic Settings-> Preferences->General.
2. In the "Message Waiting Indicator Line" field, select a single line from 1 to 9, or select "All" for all lines. If you select a single line, the MWI
illuminates when a voicemail message is pending on that line. If you select all lines, the MWI illuminates when a voicemail message is pend-
ing on any line from 1 to 9.
3. Click Save Settings to save your changes.

Customizable Message Waiting Indicator (MWI) Request URI

In Release 3.1 and up, an Administrator can enter a parameter in the configuration files to customize the request-URI for
MWI feature subscription. This parameter is called "sip linex mwi request uri".
This feature can be set on a per-line basis using the configuration files only.
Note:
"Sip Explicit MWI Subscription" must be enabled to use this feature. For more information about the Sip Explicit MWI
Subscription" parameter, see
Configuring Message Waiting Indicator (MWI) Request URI
Use the following procedure to configure an MWI request URI on the IP phone.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
41-001343-02 REV05 – 07.2014
"Advanced SIP Settings (optional)" on page 4-69.
"Message Waiting Indicator Settings"
Operational Features
on page A-127.
5-74