Configurable Route Header in SIP Packet
The IP Phones support the following parameter:
•
This parameter enables or disables the addition of the Route header in a SIP
packet. Enable this parameter for outbound proxies that do not support Route
headers.
Enabling/Disabling the Route Header in the SIP Packet
Use the following procedure to enable/disable the addition of the Route header in
the SIP packet.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
in SIP Packet"
on
page A-270.
sip remove route
Note: When enabled this will break all support for SIP routing, so if
some other device in the network attempts to add itself to the route it will
fail.
"Route Header