Picture Id Feature - Aastra 6730i Administrator's Manual

Operational Features
Configuring the Screen Saver Timer Using the Phone UI
Use the following procedure to configure the screen saver timer using the IP Phone UI.
IP Phone UI
1.
Press to enter the Options List.
2.
Navigate to the Display option and press the
3.
Press the 2 navigation button to highlight the Screen Saver Timer setting.
4. Using the keypad, enter in the desired amount of time (in seconds) the phone must be idle before the screen saver is initiated. The range is
0 (screensaver disabled) to 7200 seconds (with a default of 1800 seconds).
5. Press the Save softkey to save your changes.

Picture ID Feature

Note:
Applicable to the 6739i and 6867i IP Phones only.
The Picture ID feature on the 6739i and 6867i shows a picture ID of a caller on the LCD for all of the following events on
the phone:
• Incoming Calls (matched to Caller ID numbers)
• Outgoing Calls (matched to dialed numbers)
• Directory entries
• Callers List entries
• Redial List entries
Your Administrator stores the pictures in a centralized picture repository. The pictures are dynamically retrieved from the
centralized server for each call and then locally cached in the phone to reduce network traffic.
If there is no picture on the central server for the dialed number and/or Caller Id number, and Directory, Callers List,
and/or Redial List entry, the generic blue figure image is shown.
5-33
button or Select softkey.
Generic
Blue Image
41-001343-02 REV05 – 07.2014