Increased Number Of Displayed Characters For Softkey Line Labels - Aastra 6730i Administrator's Manual

Operational Features
When the "collapsed more softkey screen" parameter is enabled for the 6867i IP phone, the phone will apply the same
behavior if six top softkeys or four bottom softkeys are configured.
Configuring the Collapsed More Softkey Screen Option
Use the following parameter to configure the collapsed more softkey screen option
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on page A-166.

Increased Number of Displayed Characters for Softkey Line Labels

Note:
Applicable to the 6735i, 6737i, 6755i, 6757i, and 6757iCT IP Phones only.
Administrators can now choose to display 10 characters on softkeys and top softkeys for line labels on 6735i, 6737i,
6755i, 6757i, and 6757i CT model phones. This is useful if the user wants to display a full 10 digit number as the softkey
label, instead of a shortened label containing only 7 digits followed by ellipsis characters.
When a softkey or top softkey is defined as a line, the circle in front of the softkey label (line icon) can be removed using
the new "line icon disabled" parameter. When the "line icon disabled" parameter is set to "1", the line icon will not
appear and the label can be displayed with up to 10 characters (label will not be shortened and no ellipsis characters will
appear).
5-121
Default Screen 1
Default Screen 2
Parameter Enabled
:
"Increase of Displayed Characters for Softkey Line Labels"
41-001343-02 REV05 – 07.2014