Using The "Firmware Update" Page In The Aastra Web Ui - Aastra 6730i Administrator's Manual

Upgrading the Firmware
The IP phones support the protocols, TFTP, FTP, HTTP or HTTPS to download configuration files and upgrade firmware to
the phones from a configuration server.
The configuration server should be ready and able to accept connections. For information on configuration server require-
ments, see Chapter 1, the section,
You can download the firmware stored on the configuration server in one of three ways:
• Using the "Firmware Update" page in the Aastra Web UI at the location Advanced Settings->Firmware Update.
• Using the IP Phone UI or the Aastra Web UI to restart the phone. The phone automatically looks for firmware updates
and configuration files during the boot process.
• Setting an Auto-Resync feature to automatically update the firmware, configuration files, or both at a specific time in a
24-hour period). (Feature can be enabled using the configuration files or the Aastra Web UI).

Using the "Firmware Update" Page in the Aastra Web UI

You can use the Aastra Web UI to manually force a firmware update from the configuration server to a phone in your net-
work by selecting Advanced Settings->Firmware Update. You can configure the phone to perform the update using any
of the protocols that the phone supports: TFTP, FTP, HTTP, or HTTPS.
Warning!
Do not reset or turn off the phone until the download is complete.
Note:
This procedure downloads an updated <phone model.st> file as well as any other firmware files that were updated, to
your phone.
41-001343-02 REV05 – 07.2014
"Configuration Server Requirement"
Upgrading the Firmware
on page 1-49.
8-2