Configurable Home/Idle Screen Modes - Aastra 6730i Administrator's Manual

Operational Features
Idle Screen Image Requirements for the 6867i:
• 240x320 pixels
• 24-bit color depth.
• Both .png and .jpg files are supported
• There should be no frame around the image
• Avoid using images with light-colored elements
Configuring Background Image on Idle Screen
Use the following procedures to configure the background image on the idle screen
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,

Configurable Home/Idle Screen Modes

Note:
Applicable to the 6867i IP Phone only.
The 6867i IP phone contains two Home/Idle screen layout options. The default primary screen mode provides users with
a larger date and time and displays the Screen Name ("sip screen name") parameter beside the line number in the top
status bar.
Note:
Screen Name 2 ("sip screen name 2") is not displayed on the 6867i IP phone's screen when the primary screen mode is
configured for use.
The secondary screen mode displays both the Screen Name and Screen Name 2 parameters. They are displayed above
the smaller, repositioned date and time.
Primary Home/Idle Screen Mode
Administrators can switch the home/idle screen to the preferred layout by defining the "idle screen mode" parameter in
the configuration files or by navigating to the Display options menu on the phone.
5-31
"Background Image on Idle Screen"
Secondary Home/Idle Screen Mode
on page A-55.
41-001343-02 REV05 – 07.2014