Use; Adjusting The Support Feet; Adjust Horizontal Seat Position; Adjusting The Vertical Seat Position - Tunturi Pure U 10.1 User Manual

• Slide the seat tube into the main
frame.
Remark:
The seat height adjustment knob needs
to be loosen first by turn/ pull before the
seat tube can slide in fully.
Assembly step I
mark:
There is a marker for Right (R) and Left
(L) pedal in pedal axle.
• Fix Left pedal to the crank arm
by turning in counter clock wise
direction.
• Fix Right pedal to the crank arm by
turning in the clock wise direction.
Remark:
Make sure the pedals are tightened fully.
Assembly step J
• Attach the transformer to the bike
before connect it to the wall outlet.
Remark:
Always remove power cord when
machine is not in use.
8

Use

Adjusting the support feet

The equipment is equipped with 4
support feet. If the equipment is not
stable, the support feet can be adjusted.
Turn the support feet as required to put
the equipment in a stable position.
Tighten the locknuts to lock the support
feet.
NOTE
The machine is the most stable when all
support feet are turned fully in. Therefore
start to level the machine by turning all
support feet fully in, before turning out
the required support feet to stable the
machine.

Adjust horizontal seat position

The horizontal seat position can be
adjusted by setting the seat to the
required position.
• Loosen the seat adjustment knob.
• Move the seat to the required
position.
• Tighten the seat adjustment knob.

Adjusting the vertical seat position

The vertical seat position can be
adjusted by setting the seat to the
required position.
• Loosen the seat adjustment knob.
• Move the seat to the required
position.
• Tighten the seat adjustment knob.