Console (Fig F); Explanation Of Buttons; Adjusting The Support Feet; Adjusting Resistance - Tunturi F20 User Manual

Use

Adjusting the support feet

The equipment is equipped with 4 support feet. If
the equipment is not stable, the support feet can be
adjusted.
- Turn the support feet as required to put the
equipment in a stable position.
- Tighten the locknuts to lock the support feet.
Adjusting the horizontal seat position
The horizontal seat position can be adjusted by setting
the seat to the required position.
- Loosen the seat adjustment knob.
- Move the seat to the required position.
- Tighten the seat adjustment knob.
Adjusting the vertical seat position
The vertical seat position can be adjusted by setting the
seat tube to the required position. With the leg almost
straight, the arch of the foot must touch the pedal at its
lowermost point.
- Loosen the seat tube adjustment knob.
- Move the seat tube to the required position.
- Tighten the seat tube adjustment knob.
Adjusting the handlebar
The handlebar can be adjusted according to the height
and the exercise position of the user.
- Loosen the handlebar adjustment knob.
- Move the handlebar to the required position.
- Tighten the handlebar adjustment knob.

Adjusting resistance

To increase or decrease resistance, turn the adjustment
knob at the top of the handlebar support tube
clockwise (+ direction) to increase resistance and
counterclockwise (- direction) to decrease resistance.
The scale above the knob (1-8) helps you find and reset
a suitable resistance.

Console (fig F)

1
2
3
1. Display
2. Tablet/ book support
3. Buttons
CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
NOTE
• The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature

Explanation of buttons

Up (Dail)
- Press UP Key to increase value. Press and hold the
key to increase value faster.
- TIME setting range: 00:00~99:00 (Each increment is
1:00)
- CAL setting range: 0~9990 (Each increment is 10)
1 7
English