Touch Calibrate; Quick Start; Cleaning And Maintenance; Transport And Storage - Tunturi Pure U 10.1 User Manual

When pressing "Touch Calibrate" button
it start Touch Calibrate function
Touch each appearing gun sight as
accurate as possible in the centre to
accomplish the calibration procedure.
After finish the calibration procedure
you will automatically return to setting
window.
Remark:
you cannot go back to setting menu
without accomplishing the calibration
procedure first.

Quick Start

Open Quick Start by pressing the
"Quick start" button in main function bar.
Quick start will start a workout without
any preset settings as in Manual mode.
24

Touch Calibrate

Adjusting tension levels needs to be
done manually, and there is no time limit
and ore heart rate limit set.
Cleaning and
maintenance
Defects and malfunctions Despite
continuous quality control, defects and
malfunctions caused by individual parts
can occur in the equipment. In most
cases, it will be sufficient to replace the
defective part.
• If the equipment does not function
properly, immediately contact the
dealer.
• Provide the model number and the
serial number of the equipment to
the dealer. State the nature of the
problem, conditions of use and
purchase date.
Transport and
storage
WARNING
Carry and move the equipment with at
least two persons.
• Remain standing in front of the
equipment on each side and take a
sturdy grip at the handlebars. Lift the
front of the equipment so as to lift the
rear of the equipment on the wheels.