Installing
4.1
Overview of the inverter installation
Installing the inverter
Precondition
Before installation, please check:
● Are the required inverter components available?
– Power Module
– Control Unit
– Accessories, e.g. line reactor or braking resistor
● Do you have the necessary tools and small parts/components required to install the
inverter?
Procedure
To install the inverter, proceed as follows:
1. Install the accessories (reactors, filter or braking
resistor) for the Power Module:
(Page 58)
2. Install the Power Module.
3. Install the Control Unit.
You have installed all components of the inverter.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Installing reactors, filters and braking resistors
Installing Power Modules (Page 60)
Installing Control Unit (Page 90)
4
53