Chapter 3
Device Management
Section 3.6.6
Configuring an Ethernet Port
To configure an Ethernet port, do the following:
Navigate to Ethernet Ports » Configure Port Parameters . The Port Parameters table appears.
1.
Figure 25: Port Parameters Table
2.
Select an Ethernet port. The Port Parameters form appears.
11
Figure 26: Port Parameters Form
1. Port Box 2. Name Box 3. Media Box 4. State Box 5. AutoN Box 6. Speed Box 7. Dupx Box 8. FlowCtrl Box 9. LFI
Box 10. Alarm Box 11. Apply Button 12. Reload Button
3.
Configure the following parameter(s) as required:
Parameter
Port
72
Description
Synopsis: 1 to maximum port number
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
7
8
9
10
12
Configuring an Ethernet Port