Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
5
Figure 162: Static Multicast Groups Form
1. MAC Address Box 2. VID Box 3. CoS List 4. Ports Box 5. Apply Button 6. Delete Button 7. Reload Button
3.
Configure the following parameter(s) as required:
Parameter
MAC Address
VID
CoS
Ports
Click Apply.
4.
Section 5.8.2.7
Deleting a Static Multicast Group
To delete a static multicast group, do the following:
1.
Navigate to Multicast Filtering » Configure Static Multicast Groups . The Static Multicast Groups table
appears.
Deleting a Static Multicast Group
6
Description
Synopsis: ##-##-##-##-##-## where ## ranges 0 to FF
Default: 00-00-00-00-00-00
Multicast group MAC address.
Synopsis: 1 to 4094
Default: 1
VLAN Identifier of the VLAN upon which the multicast group
operates.
Synopsis: { N/A, Normal, Medium, High, Crit }
Default: N/A
Prioritizes traffic for the specified MAC address. To not prioritize
traffic based on the address, select N/A.
Synopsis: Any combination of numbers valid for this parameter
Default: None
Ports to which the multicast group traffic is forwarded.
Chapter 5
Setup and Configuration
1
2
3
4
7
231
Advertisement
Table of Contents
Troubleshooting
