Viewing A List Of Vlans; Configuring Vlans Globally - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
1
Figure 80: Inter-VLAN Communications
1. Server, Router or Layer 3 Switch 2. Switch 3. VLAN 2 4. VLAN 3 5. VLAN 4
Section 5.1.2

Viewing a List of VLANs

To view a list of all VLANs, whether they were created statically, implicitly or dynamically , navigate to Virtual
LANs » View VLAN Summary . The VLAN Summary table appears.
Figure 81: VLAN Summary Table
If a VLANs are not listed, add static VLANs as needed. For more information, refer to
Static VLAN" .
Section 5.1.3

Configuring VLANs Globally

To configure global settings for all VLANs, do the following:
Navigate to Virtual LANs » Configure Global VLAN Parameters . The Global VLAN Parameters form
1.
appears.
Viewing a List of VLANs
2
Setup and Configuration
199.85.245.1/25
199.85.245.128/26
199.85.245.192/26
Section 5.1.5.2, "Adding a
Chapter 5
3
4
5
141