Related Documents; System Requirements; Accessing Documentation - Siemens RUGGEDCOM ROS v4.3 User Manual

Preface
Example
command
command parameter
command parameter1 parameter2
command parameter1
command [ parameter1 | parameter2 ]
command { parameter3 | parameter4 }
command parameter1 parameter2 { parameter3 |
parameter4 }

Related Documents

Other documents that may be of interest include:
• RUGGEDCOM RS900 Installation Guide

System Requirements

Each workstation used to connect to the RUGGEDCOM ROS interface must meet the following system
requirements:
• Must have one of the following Web browsers installed:
▫ Microsoft Internet Explorer 8.0 or higher
▫ Mozilla Firefox
▫ Google Chrome
▫ Iceweasel/IceCat (Linux Only)
• Must have a working Ethernet interface compatible with at least one of the port types on the RUGGEDCOM
device
• The ability to configure an IP address and netmask on the computer's Ethernet interface

Accessing Documentation

The latest user documentation for RUGGEDCOM ROS v4.3 is available online at www.siemens.com/ruggedcom. To
request or inquire about a user document, contact Siemens Customer Support.
xiv
parameter2
Description
Commands are in bold.
Parameters are in plain text.
Parameters are listed in the order they must be entered.
Parameters in italics must be replaced with a user-defined value.
Alternative parameters are separated by a vertical bar (|).
Square brackets indicate a required choice between two or more
parameters.
Curly brackets indicate an optional parameter(s).
All commands and parameters are presented in the order they must
be entered.
RUGGEDCOM ROS
User Guide
Related Documents