Viewing A List Of Rmon Events; Adding An Rmon Event - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
• Section 3.10.3.3, "Deleting an RMON Event"
Section 3.10.3.1

Viewing a List of RMON Events

To view a list of RMON events, navigate to Ethernet Stats » Configure RMON Events . The RMON Events table
appears.
Figure 58: RMON Events Table
If events have not been configured, add events as needed. For more information, refer to

"Adding an RMON Event"

Section 3.10.3.2
Adding an RMON Event
To add an RMON alarm, do the following:
1. Navigate to Ethernet Stats » Configure RMON Events . The RMON Events table appears.
1
Figure 59: RMON Events Table
1. InsertRecord
2. Click InsertRecord. The RMON Events form appears.
Viewing a List of RMON Events
.
Chapter 3
Device Management
Section 3.10.3.2,
103