Available Services By Port - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 1
Introduction
Figure 1: RS900 Port Numbering (Typical)
Use these numbers to configure applicable features on select ports.
Section 1.5

Available Services by Port

The following table lists the services available under RUGGEDCOM ROS. This table includes the following
information:
• Services
The service supported by the device.
• Port Number
The port number associated with the service.
• Port Open
The port state, whether it is always open and cannot be closed, or open only, but can be configured.
NOTE
In certain cases, the service might be disabled, but the port can still be open (e.g. TFTP).
• Port Default
The default state of the port (i.e. open or closed).
• Access Authorized
Denotes whether the ports/services are authenticated during access.
Services
Telnet
10
8
7
5
3
1
Service Enabled/
Port Number
Disabled
TCP/23 Disabled
9
6
4
2
Access Authorized
Yes
Available Services by Port
RUGGEDCOM ROS
User Guide
Note
Only available
through two