Deleting A Security-To-Group Map; Managing Snmp Groups - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Section 5.6.2.3

Deleting a Security-to-Group Map

To delete a security-to-group map, do the following:
Navigate to Administration » Configure SNMP » Configure SNMP Security to Group Maps . The SNMP
1.
Security to Group Maps table appears.
Figure 136: SNMP Security to Group Maps Table
Select the map from the table. The SNMP Security to Group Maps form appears.
2.
4
Figure 137: SNMP Security to Group Maps Form
1. Security Model Box 2. Name Box 3. Group Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Click Delete.
Section 5.6.3

Managing SNMP Groups

Multiple SNMP groups (up to a maximum of 32) can be configured to have access to SNMP.
CONTENTS
• Section 5.6.3.1, "Viewing a List of SNMP Groups"
• Section 5.6.3.2, "Adding an SNMP Group"
Deleting a Security-to-Group Map
5
Chapter 5
Setup and Configuration
1
2
3
6
205