Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
3.
Configure the following parameter(s) as required:
Parameter
Trunk ID
Trunk Name
Ports
4.
Click Apply.
Section 5.10.2.3
Deleting a Port Trunk
To delete a port trunk, do the following:
1.
Navigate to Link Aggregation » Configure Port Trunks . The Port Trunks table appears.
Figure 175: Port Trunks Table
2.
Select the port trunk from the table. The Port Trunks form appears.
Deleting a Port Trunk
Description
Synopsis: 1 to 2
Default: 1
Trunk number. It doesn't affect port trunk operation in any way
and is only used for identification.
Synopsis: Any 19 characters
Provides a description of the aggregated link purpose.
Synopsis: Any combination of numbers valid for this parameter
Default: None
List of ports aggregated in the trunk.
Chapter 5
Setup and Configuration
245
Advertisement
Table of Contents
Troubleshooting
