7.
MEMORY CASSETTE AND BATTERY
7.2
Battery
This section explains the specifications, handling precautions and installation procedures
of the battery.
Properly connect batteries. Do not charge, disassemble, heat, or throw them into the
DANGER
fire and do not make them short-circuited and soldered.
Incorrect battery handling may cause personal injuries or a fire due to exothermic
heat, burst and/or ignition.
7.2.1
Specifications
The specifications of the battery used for power failure compensation are shown in Table
7.2.
Classification
Initial voltage
Battery guarantee period
Lithium content
Application
External dimensions
For the battery directive in EU member states, refer to Appendix 6.
7.2.2
Handling precautions
This section explains the specifications, handling precautions and installation procedures
of the battery.
(1) Do not short it.
(2) Do not disassemble it.
(3) Do not put it in a fire.
(4) Do not heat it.
(5) Do not solder to the electrodes.
Table7.2 Battery specifications
Item
IC-RAM memory backup and power failure compensation
A6BAT
Thionyl chloride lithium battery
3.6VDC
5 years
0.48g
16mm (0.63inch) 30mm (1.18inch)
7 - 7