Appendix 3.3.3 Precautions When Utilizing Sequence Programs; Appendix 3.3.4 Checking The Influence Of The Increased Instruction Processing Speed On The System - Mitsubishi A1SJH(S8) User Manual

APPENDIX

Appendix 3.3.3 Precautions when utilizing sequence programs

When applying parameters and programs created for AnSCPU to AnSHCPU, follow the
procedures below.
(1) Select "Read File" from the initial setting menu after starting up the GPP function
(2) Read the parameter and program files created for AnSCPU from the floppy or hard
(3) Using the PLC type change item in the initial setting menu, change the CPU type
(4) Select the file maintenance menu to read the parameters and programs created for
The above procedures allow parameters and programs for AnSCPU to be used for
AnSHCPU without any change or modification.

Appendix 3.3.4 Checking the influence of the increased instruction processing speed on the system

Confirm the influences of the increased instruction processing speed and reduced scan
time on the user system.
software package.
disk, and then write those parameters and programs into a peripheral device.
(This file reading operation is required for performing the procedure described in 3.)
name to A3 that is for AnSHCPU.
(Perform the procedure as given in 4, since the parameter is reset to the default.)
AnSCPU from the floppy or hard disk into the peripheral device.
(Ignore the error message 'Unmatched PLC Type' even if such a message appers.)
App - 41