Mitsubishi A1SJH(S8) User Manual page 31

2. SYSTEM CONFIGURATION
(2)
POINT
(1) Old software packages other than SW3-GPPA, SW3GP-GPPA, and SW4GP-
GPPA cannot be used as the software package for system start-up for
A6GPP/A6PHP.
(2) Take caution when using a software version that selects "A0J2H" or "A1S" for
ROM writing, since the file register area of 8k points is reduced to 4k points.
To measure this, use a software package for which A1SJH/A1SH can be
selected.
Utility package
(a) The following shows the applicable utility packages:
SW0GHP-UTLPC-FN1
SW0GHP-UTLPC-FN0
SW0-AD57P
[1] Select "A3CPU" when a SW0GHP-UTLPC-FN1 or a SW0GHP-UTLP-
FD1 is started up.
[2] If both a SW1GP-AD57P and another utility package are used in
combination, specify "AD57P-COM" as the file name.
(b) The following shows the inapplicable utility package model:
SW0-SAPA(MELSAP)
SW0GHP-UTLPC-PID
SW0C-UTLP-FN0
2 - 10
SW0GHP-UTLP-FD1
SW1GP-AD57P