Mitsubishi A1SJH(S8) User Manual page 95

6. BASE UNIT AND EXTENSION CABLE
(2)
A1S65B-S1,
A1S68B-S1
A1S52B-S1, A1S55B-
S1, A1S58B-S1
No. Name
1) Extension cable connector
2) Base cover
3) Module connector
4) Module mounting screw hole Screw mounting hole to fix the module to the base. Screw size: for M4 screw
5) Base installation hole
6) Hook for DIN rail
7) FG terminal
Extension base unit (A1S52B, A1S55B, A1S58B, A1S52B-S1, A1S55B-S1, A1S58B-
S1, A1S65B, A1S68B, A1S65B-S1, A1S68B-S1)
5)
2)
POWER
1)
5)
(FG)
1)
A connector used to connect an extension cable, by which signals can be
transferred to/from an main base unit.
Before connecting the extension cable, remove the supplied connector cover.
A protective cover for the extension cable connector.
Connectors used to install the power supply module, I/O modules and/or special
function modules. To prevent dust from entering, install the supplied connector
cover or a blank cover (A1SG60) to any open connector.
A bell-shaped hole used to install the base unit to a control panel. (For M5 screw)
Hook for DIN rail installation.
A1S52B, A1S55B, A1S52B-S1, A1S55B-S1...........................................1 pc
A1S65B, A1S68B, A1S58B, A1S65B-S1, A1S68B-S1, A1S58B-S1.......2 pcs
The ground terminal connected to the shielding pattern of the printed-circuit board.
6)
2)
7) 6)
Description
6 - 8
4)
A1S68B
3)
4)
A1S58B
3)