Input And Receive Job Function - Bosch IRIS-Net User Manual

IRIS-Net
(empty)
(empty)
(empty)
0 ms
Input and Receive Job Function: The following table lists all functions together with their individual settings, which
can be triggered via control input or Receive Job.
Function Parameter
Empty -
Power off on flip
Absolute All DSP
parameters
Relative All DSP
parameters
Flip Parameters
with two
statuses
Preset U01 - U08, F01
Monitor Relay, IN A, IN
B, OUT A, OUT
B
Memo flag Set, Clear,
Toggle Memo
flags 1 - 16
Bosch Security Systems B.V.
This column allows specifying an event (condition) that triggers the
corresponding transmit job code. Clicking the desired line in the Condition
menu opens a dialog field that shows all accessible functions. The table
"Output and Transmit Job Conditions" lists all functions together with their
individual settings.
Here you can set the different function parameters. For more information,
please refer to the table "Output and Transmit Job Conditions".
Certain functions allow specifying optional parameter values.
0...10027 ms Here, you can program delay or debouncing times. A transmit job code is sent
16.33 ms following a specific event and after the specified time interval has past.
Steps
This column allows entering whether a job code is transmitted when the
specified Condition is "true" (no entry) or "false" (click "X" to signal an inverted
state).
Opt. Value
-
Corresponding
Parameter
Value
(parameter-
dependent)
Parameter
Value Off- set
(parameter-
dependent)
on, off
Function executed
None
Power Off (Standby) Power On
Power-status change (ON to Stand-by and reverse)
Set the specified absolute parameter value for the selected
parameter
Changes the actual value of the selected parameter by the specified
offset value
Changes the status of the selected parameter (e.g. bypass On / Off)
Changes a preset to the specified preset number
Activates respectively deactivates the selected monitor bus signal
Sets, erases or changes selected memory flags. Up to 16 memory
flags are available and simultaneously accessible.
User Manual
REMOTE AMPLIFIER | en
2017.05 | 3.20 | F.01U.119.956
188